Installing and removing drives
Your server's basic configuration includes one CD or DVD drive and as many as three SCSI
hot-swap hard drives. An optional diskette drive can also be added in place of the center
hard drive.
As you prepare to install drives, remember:
■
If you need to install a diskette drive and a CD or DVD drive is installed in the slim-line
drive bay, you must install the diskette drive in a converted hard drive bay.
■
Before you install a drive, see the drive's documentation for information on
configuring the drive, setting drive jumpers, and attaching cables.
■
You may need to configure the drives you install using the BIOS Setup utility. Press
F2 at startup to open the BIOS Setup utility.
www.gateway.com
51