Gateway 9415 User Manual page 101

7
Locate the old battery on the system board and note its orientation. You will need
to install the new battery the same way.
8
Push the battery retention clip away from the battery until the battery lifts up, then
remove the old battery. You can use a screwdriver to help lift the battery.
9
Make sure that the positive (+) side of the new battery is facing up, then press the
new battery into the socket until it snaps into place.
10
Replace the PCI riser assembly by following the instructions in
installing the PCI riser assembly" on page
11
Follow the instructions in
12
Turn on your server, then press F2 when the Gateway logo screen appears during
startup. The BIOS Setup utility opens.
13
Restore any BIOS settings that you wrote down in
14
Save all your settings and close the BIOS Setup utility.
96
CMOS
battery
69.
"Closing the server case" on page
www.gateway.com
"Removing and
44.
Step 3.