3
Follow the instructions in
4
Disconnect the fan cable from the connector on the power distribution board.
5
Lift the fan from the power supply fan module assembly in the chassis.
6
Insert the replacement fan into the power supply fan module assembly.
Important
7
Connect the fan cable to the connector on the power distribution board.
8
Follow the instructions in
9
Follow the instructions in
"Removing the power supply air duct" on page
Make sure the arrows on top of the fans indicating airflow point to
the back of the chassis.The fan cable should exit the fan mudule
toward the back of the chassis.
"Installing the power supply air duct" on page
"Closing the server case" on page
www.gateway.com
49.
50..
44.
81