Print Jobs On The Océ Tds700 Power Logic Controller Application; Introduction - Oce TDS700 User Manual

Introduction

Print jobs on the Océ TDS700 Power
®
Logic controller application
Introduction
Introduction
The print jobs you send to the Océ TDS700 are first received on the controller.
Depending on the workflow settings of the system, the print jobs are sent
immediately to the printer or they are stored for further processing. Processing and
managing the print jobs can be done in the Océ TDS700 Power Logic
application. A key operator has maximum control over the print jobs and copy jobs
in the Print jobs workspace. The 3 areas in which the workspace is divided give a
complete overview of the jobs that are ready to be printed, waiting to be sent to the
scheduled print jobs, or already printed and temporarily stored for reprinting.
The next paragraphs give an overview of the main functions in the three work areas:
'Scheduled jobs'
■
contains the print and copy jobs that do not need operator intervention
'Waiting jobs'
■
contains the print jobs that are held for further processing or that have a lower
priority.
'Printed jobs'
■
contains the copy and print jobs that were printed on the Océ TDS700.
74 Chapter 2 Use the Océ TDS700 to print a job
®
controller