8
Field Replaceable Unit Disassembly/Assembly
Motors
Y-axis (drum) motor and process motor
8-28
Phaser 360 Color Printer
Tools required
Magnetic screwdriver
3/32 in hex key
1.
Turn off the printer and remove the power cord.
2.
Remove the top, front panel, right-side and left-side covers as
explained in the earlier topic, "Cabinet panels and covers" on
page 8-4.
3.
Open the front door and remove the drum maintenance cartridge.
4.
Remove the ink loader as explained in the earlier topic, "Ink loader"
on page 8-6 to access the power control board underneath.
5.
Remove the Y-axis belt drive assembly as explained in the previous
procedure, "Y-axis belt drive assembly" on page 8-15.
6.
Remove the paper preheater as explained in the previous procedure,
"Paper preheater" on page 8-17.
T-20 TORX tip
T-15 TORX tip