To Recall Arbitrary Waveforms - Agilent Technologies InfiniiVision 4000 X-Series User Manual

3 In the Recall Menu, press the Recall softkey and turn the Entry knob to
4 Press the To Ref: softkey and turn the Entry knob to select the desired
5 Press the softkey in the second position and use the Entry knob to
6 Press the Press to Recall softkey.
7 If you would like to clear the display of everything except the reference

To recall arbitrary waveforms

Arbitrary waveform files can be recalled from one of four internal (\
Agilent Flash) locations or from an external USB storage device.
When recalling arbitrary waveforms (from an external USB storage device)
that were not saved from the oscilloscope, be aware that:
• If the file contains two columns, the second column is automatically
• If the file contains more than two columns, you are prompted to select
• The oscilloscope uses a maximum of 8192 points for an arbitrary
To recall an arbitrary waveform:
1 Press [Save/Recall] > Recall > Recall:; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Press the Press to Recall softkey.
4 If you would like to clear the display, press Clear Display.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
select Reference Waveform data (*.h5) .
reference waveform location.
navigate to the file to recall. See
page 315.
A message indicating whether the recall was successful is displayed.
waveform, press Clear Display.
chosen.
which column to load. Up to five columns are parsed by the
oscilloscope; columns above the fifth are ignored.
waveform. For more efficient recalls, make sure your arbitrary
waveforms are 8192 points or less.
Arbitrary Waveform data (*.csv).
navigate to the file to recall. See
page 315.
A message indicating whether the recall was successful is displayed.
Save/Email/Recall (Setups, Screens, Data)
"To navigate storage locations"
"To navigate storage locations"
18
on
on
319