Interpreting I2C Lister Data; Searching For I2C Data In The Lister - Agilent Technologies InfiniiVision 4000 X-Series User Manual
Hide thumbs
Also See for InfiniiVision 4000 X-Series:
- Programmer's manual (1352 pages) ,
- User manual (488 pages)
Table of Contents
Advertisement
Interpreting I2C Lister Data
In addition to the standard Time column, the I2C Lister contains these
columns:
• Restart — indicated with an "X".
• Address — colored blue for writes, yellow for reads.
• Data — data bytes.
• Missing Ack — indicated by an "X", highlighted in red if an error.
Aliased data is highlighted in pink. When this happens, decrease the
horizontal time/div setting and run again.
Searching for I2C Data in the Lister
The oscilloscope's search capability lets you search for (and mark) certain
types of I2C data in the Lister. You can use the [Navigate] key and controls
to navigate through the marked rows.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
I2C/SPI Triggering and Serial Decode
25
421
Advertisement
Table of Contents
