For reference information, see:
When using licensed serial bus
triggering and decode features, see:
Abbreviated instructions for pressing a series of keys and softkeys
T I P
Instructions for pressing a series of keys are written in an abbreviated manner. Instructions
for pressing [Key1], then pressing Softkey2, then pressing Softkey3 are abbreviated as
follows:
Press [Key1] > Softkey2 > Softkey3.
The keys may be a front panel [Key] or a Softkey. Softkeys are the six keys located directly
below the oscilloscope display.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
•
Chapter
22, "Reference," starting on page 365
•
Chapter
23, "CAN/LIN Triggering and Serial Decode,"
starting on page 385
•
Chapter
24, "FlexRay Triggering and Serial Decode,"
starting on page 403
•
Chapter
25, "I2C/SPI Triggering and Serial Decode,"
starting on page 413
•
Chapter
26, "I2S Triggering and Serial Decode,"
starting on page 433
•
Chapter
27, "MIL-STD-1553/ARINC 429 Triggering and
Serial Decode," starting on page 443
•
Chapter
28, "UART/RS232 Triggering and Serial
Decode," starting on page 459
•
Chapter
29, "USB 2.0 Triggering and Serial Decode,"
starting on page 469
7