Top - Agilent Technologies InfiniiVision 4000 X-Series User Manual

14
Measurements

Top

The Top of a waveform is the mode (most common value) of the upper
part of the waveform, or if the mode is not well defined, the top is the
same as Maximum. The Y cursor shows the value being measured.
See Also
•
To isolate a pulse for Top measurement
The following figure shows how to use Zoom mode to isolate a pulse for a
Top measurement.
You may need to change the measurement window setting so that the
measurement is made in the lower, Zoom window. See
Window"
Figure 47
248
"To isolate a pulse for Top measurement"
on page 266.
Isolating area for Top measurement
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
on page 248
"Measurement