Rising Edge Count; Falling Edges Count; Mixed Measurements; Area - Agilent Technologies InfiniiVision 4000 X-Series User Manual
Hide thumbs
Also See for InfiniiVision 4000 X-Series:
- Programmer's manual (1352 pages) ,
- User manual (488 pages)
Table of Contents
Advertisement
This measurement is available for analog channels.
Rising Edge Count
The Rising Edge Count measurement is an edge count for the selected
waveform source.
This measurement is available for analog channels.
Falling Edges Count
The Falling Edges Count measurement is an edge count for the selected
waveform source.
This measurement is available for analog channels.
Mixed Measurements
•
Area
Area measures the area between the waveform and the ground level. Area
below the ground level is subtracted from area above the ground level.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Negative pulse count
"Area"
on page 263
14
Measurements
263
Advertisement
Table of Contents
