Peak-Peak; Peak- Peak; Maximum; Minimum - Agilent Technologies InfiniiVision 4000 X-Series User Manual

The units of math waveforms are described in
Waveforms"
•
•
•
•
•
•
•
•
•
•
•
•

Peak-Peak

The peak- to- peak value is the difference between Maximum and Minimum
values. The Y cursors show the values being measured.

Maximum

Maximum is the highest value in the waveform display. The Y cursor
shows the value being measured.

Minimum

Minimum is the lowest value in the waveform display. The Y cursor shows
the value being measured.

Amplitude

The Amplitude of a waveform is the difference between its Top and Base
values. The Y cursors show the values being measured.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
on page 91.
"Peak- Peak" on page 247
"Maximum" on page 247
"Minimum" on page 247
"Amplitude" on page 247
"Top" on page 248
"Base" on page 249
"Overshoot" on page 249
"Preshoot" on page 250
"Average" on page 251
"DC RMS" on page 251
"AC RMS" on page 252
"Ratio" on page 254
Measurements
"Units for Math
14
247