Software And Firmware Updates; Binary Data (.Bin) Format - Agilent Technologies InfiniiVision 4000 X-Series User Manual

For information about upgrading your oscilloscope through licensing,
contact your local Agilent Technologies representative or see
"www.agilent.com/find/4000X-

Software and Firmware Updates

From time to time Agilent Technologies releases software and firmware
updates for its products. To search for firmware updates for your
oscilloscope, direct your web browser to
"www.agilent.com/find/4000X- Series-
To view the currently installed software and firmware press [Help] > About
Oscilloscope.
Once you have downloaded a firmware update file, you can place it on a
USB storage device and load the file using File Explorer (see
Explorer"
the oscilloscope's web interface (see

Binary Data (.bin) Format

The binary data format stores waveform data in binary format and
provides data headers that describe that data.
Because the data is in binary format, the size of the file is approximately
5 times smaller than the ASCII XY format.
If more than one source is on, all displayed sources will be saved, except
math functions.
When using segmented memory, each segment is treated as a separate
waveform. All segments for a channel are saved, then all segments of the
next (higher numbered) channel are saved. This continues until all
displayed channels are saved.
When the oscilloscope is in the Peak Detect acquisition mode, the
minimum and maximum value waveform data points are saved to the file
in separate waveform buffers. The minimum value data points are saved
first; then, the maximum value data points are saved.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
on page 331), or you can use the Instrument Utilities page of
Series".
sw".
"Instrument Utilities"
22
Reference
"File
on page 358).
375