Editing Existing Arbitrary Waveforms - Agilent Technologies InfiniiVision 4000 X-Series User Manual

17
Waveform Generator
When you create a new arbitrary waveform, the existing arbitrary waveform definition
C A U T I O N
is overwritten. Note that you can use the [Save/Recall] key and menu to save
arbitrary waveforms to one of four internal storage locations or to a USB storage
device, and you can recall them later. See
and
Note that you can also create a new arbitrary waveform by capturing
another waveform. See
Waveform"

Editing Existing Arbitrary Waveforms

Using the
To select a point, touch or drag in the upper, full waveform display:
Touchscreen to
Edit Existing
Waveforms
For fine points selection, touch the previous point or next point arrows:
To adjust the value of a point, drag the voltage level handle up or down:
292
"To recall arbitrary waveforms"
The new waveform is created and the Edit Waveform Points menu is
opened. See "Editing Existing Arbitrary Waveforms"
on page 297.
"To save arbitrary waveforms"
on page 319.
"Capturing Other Waveforms to the Arbitrary
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
on page 315
on page 292.