Arinc 429 Serial Decode - Agilent Technologies InfiniiVision 4000 X-Series User Manual

5 If you select the Label + Bits condition, use the Bits softkey and submenu
6 If you select the Label Range condition, use the Label Min and Label Max
You can use the Zoom mode for easier navigation of the decoded data.
To display ARINC 429 serial decode, see
N O T E

ARINC 429 Serial Decode

To set up the oscilloscope to capture ARINC 429 signals, see
ARINC 429 Signals"
For ARINC 429 triggering set up see
N O T E
To set up ARINC 429 serial decode:
1 Press [Serial] to display the Serial Decode Menu.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
to specify the bit values:
Press the Data, SSM, and/or SSM softkeys and use the binary keypad
dialog to enter the 0, 1, or X (don't care) values.
The SDI or SSM selections may not be available, depending on word
format selection in the Serial Decode Menu.
softkeys to specify the ends of the range.
Again, label values are always displayed in octal.
on page 450.
MIL-STD-1553/ARINC 429 Triggering and Serial Decode
"ARINC 429 Serial Decode"
"ARINC 429 Triggering"
on page 453.
"Setup for
on page 452.
27
453