Measurements Summary - Agilent Technologies InfiniiVision 4000 X-Series User Manual

14
Measurements
6 To turn off measurements, press the [Meas] key again.
7 To stop making one or more measurements, press the Clear Meas softkey

Measurements Summary

The automatic measurements provided by the oscilloscope are listed in the
following table. All measurements are available for analog channel
waveforms. All measurements except Counter are available for reference
waveforms and math waveforms other than FFT. A limited set of
measurements is available for math FFT waveforms and for digital channel
waveforms (as described in the following table).
Measurement
"Snapshot All"
"Amplitude"
"Area"
"Average"
"Base"
"Burst Width"
"Counter"
242
Measurements are erased from the display.
and choose the measurement to clear, or press Clear All.
After all measurements have been cleared, when [Meas] is pressed
again, the default measurements will be Frequency and Peak- Peak.
on page 245
on page 247
on page 263
on page 251
on page 249
on page 257
on page 256
Valid Valid for
for Digital
Math Channels
*
FFT
Yes, Full
Screen
Yes
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Notes
Not valid for math waveforms.