Emailing Setups, Screen Images, Or Data - Agilent Technologies InfiniiVision 4000 X-Series User Manual

18
Save/Email/Recall (Setups, Screens, Data)
1 In the Save Menu, press the File Name softkey.
2 In the File Name Menu, press the File Name softkey.
3 In the File Name keypad dialog, you can enter file names using:
4 When you are done entering the file name, select the dialog's Enter or
5 When available, the Increment softkey can be used to enable or disable

Emailing Setups, Screen Images, or Data

You can send oscilloscope files over the network via e- mail. You can
e- mail any file that can be saved.
To e- mail a setup, screen image, or data file:
1 Make sure the oscilloscope is connected to the local area network (see
2 Press the [Save/Recall] key.
3 In the Save/Recall Menu, press Email.
4 In the Email Menu, press Format; then, select the type of file you want
316
You must have a USB storage device connected to the oscilloscope for
this softkey to be active.
The touch screen (when the front panel [Touch] key is lit).
•
• The Entry knob. Turn the knob to select a key in the dialog;
then, push the
• A connected USB keyboard.
• A connected USB mouse — you can click anything on the screen that
can be touched.
OK key or press the File Name softkey again.
The file name appears in the softkey.
automatically incremented file names. Auto increment adds a numeric
suffix to your file name and increments the number with each
successive save. It will truncate characters as necessary when the file
name length is at maximum and more digits are required for the
numeric portion of the file name.
"To establish a LAN connection"
to send.
Entry knob to enter it.
on page 329).
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide