Agilent Technologies InfiniiVision 4000 X-Series User Manual page 181

3 Press the Source softkey, and turn the Entry knob to select the input
4 Press the Rising Edge or Falling Edge softkey to toggle between edge types.
5 Press the Level Select softkey to select High; then, turn the Trigger Level
6 Press the Level Select softkey to select Low; then, turn the Trigger Level
7 Press the Qualifier softkey to toggle between "greater than" or "less than".
8 Press the Time softkey, and turn the Entry knob to select the time.
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
channel source.
knob to adjust the high level.
knob to adjust the low level.
You can also push the Trigger Level knob to toggle between High and
Low selection.
10
Triggers
181