Alarm Reminder With Message - Samsung iDCS 100 User Instructions

iDCS 100
TECHNICAL MANUAL

1.17 ALARM REMINDER WITH MESSAGE

Station users can have three alarms programmed at their phones. Each alarm may be
one of the following three types:
0. NOTSET The alarm is not set.
1. TODAY ONLY The alarm will ring at the programmed time and be canceled
automatically.
2. DAILY The alarm will ring each day at this time.
In addition, each alarm may be accompanied by a 16 character message that will be
displayed while the alarm is ringing.
NOTE: These are the same three alarms described in
allows a message to be added. A display keyset is necessary to view messages.
ACTION
1. Press the transfer key followed by 116
Display shows
2. Dial 1–3 to select the alarm (e.g., 2)
OR
Press UP or DOWN to select the alarm
Press the right soft key to move the cursor
3. Enter the alarm time in 24 hour clock format
(e.g., 1300)
Display automatically advances to step 4
4. Dial the valid entry from the above list for the
alarm type
OR
Press UP or DOWN to select the alarm type
Press the right soft key to move the cursor
5. Enter messages using the method in
Programming Your Station's Name
Press the right soft key to return to step 2
6. Press the transfer key to store and exit
Alarm Reminder. This procedure
DISPLAY
[201] ALM REM(1)
HHMM:
[201] ALM REM(1)
HHMM:
[201] ALM REM (2)
HHMM:1300" " " " NOTSET
[201] ALM REM
HHMM:1300" " " " DAILY
[201] ALM REM
TAKE MEDICATION
1.24
USER INSTRUCTIONS
PART 1 JUNE 2002
" " " " NOTSET
" " " " NOTSET
HOME
PAGE
Table of
Contents