Common Bell Control - Samsung DCS-816 Programming Manual

SAMSUNG
DCS-816
MMC: 204
DESCRIPTION:
Determines whether the common bell relay contacts have an interrupted or
continuous closure when activated. If interrupted is chosen, the relay follows an
internal C.O. ring pattern of one second closed followed by three seconds open.
If assigned dry contact to Common bell, common bell relay pairs are assigned as
362.
PROGRAM KEYS
ACTION
1. Press TRSF 204
2. Dial common bell number (362 only)
3. Dial 0 for continuous or 1 for interrupted
4. Press TRSF to store and exit
DEFAULT DATA: Continuous
RELATED ITEMS: MMC 203 Assign UA Device

COMMON BELL CONTROL

UP & DOWN
KEYPAD
SOFT KEYS
Display shows current setting
OR
Press UP or DOWN key to make selection of
common bell numbers and press RIGHT soft
key to advance cursor
operation
OR
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2
OR
Press SPK to store and advance to next MMC
MMC 219 Common Relay Service Type
MMC 601 Assign Station Group
Used to scroll through options
Used to enter selections
Used to store data and advance to next MMC
(When Common bell or Loud bell is assigned
at MMC 219)
MMC 204 (Page 1 of 1)
Programming
February, 1999
DISPLAY
[362] COM/LD BEL
CONTINUOUS
[362] COM/LD BEL
CONTINUOUS
[362] COM/LD BEL
INTERRUPTED