8Sli Card; Ac15 Card; Pri (Isdn 30) Card; Brin (Isdn 2) - Samsung DCS Installation Manual

Hide thumbs Also See for DCS:

Table of Contents

Samsung DCS

Part 3

Installation

March 2001

3.7 8SLI Card

This card (Figure 3–7) has no selectable options. Insert as many 8SLI cards as are needed into uni-

versal slots 1 to 7. This card does not have its own DTMF receivers; therefore it uses the DSP engine

on the CPM (KSU central processor) as a DTMF receiver.

This card (Figure 3–8) has no selectable options. Insert as many AC15 cards as are needed into any

universal slot (Figure 3-1).

This card (Figure 3–9a) has no selectable options. However, the PRI card can only be fitted into slot

1, 3, or 5 of the basic KSU. The adjacent slot 2, 4, or 6 must be left empty (Figure A3–9b). The PRI

card cannot be fitted into an expansion KSU.

The PRI card is supplied with a 3 metre RJ-45 cable. This must be connected to the ISDN interface

provided by the ISDN service provider.

This card (Figure 3–10) has no selectable options. However, the BRIN card can only be fitted into the

basic KSU. This card provides four ISDN 2 circuits (i.e. eight channels).

The BRIN card cannot be fitted into an expansion KSU.

This card (Figure 3–11) has no selectable options. Insert the Auto Attendant (AA) card into any slot

on the expansion cabinet backplane. Push firmly in the middle of both card ejectors on each card to

ensure that it is fully inserted into the backplane connector.

This card has eight DTMF receivers dedicated to AA card use.

This card (Figure 3–12) has no selectable options. Insert the Voice Dialler card into any slot on the

expansion cabinet backplane. Push firmly in the middle of both card ejectors on each card to ensure

that it is fully inserted into the backplane connector.

Table of Contents