Migrating Floor Plans From Rf Plan To Awms - Dell PowerConnect W-Airwave Manual

Browse for the file that was saved during the controller export process above.
Click the "Upload" button to validate the XML exported from the controller.
If there are errors in the XML you will see errors on screen.
Figure 25 File Upload Explorer
Importing a large number of floor plans can impact performance on the AMWS server. The VisualRF
service must create a thumbnail, provision APs, create attenuation grid, and locate all clients on each
imported floor plan. The can cause the VisualRF > Floor Plans page to be unresponsive.

Migrating Floor Plans from RF Plan to AWMS

Process with RF Plan
Navigate to the File > Export page.
From Export drop down select "Controller WebUI Format 3.0" or "VisualRF Format"
Within the dialog box, name the export file
From the Campus Building tree, select the Campuses and Buildings you want to export
Click the Next button
Process to Import within AWMS
Navigate to VisualRF > Import page
Select the "Import floor plans from an RF Plan " link
A detailed set of directions will appear.
Click on the "Begin Importing Floor Plans" link at the bottom of the instructions and it will
automatically redirect to the file upload explorer.
Browse for the file that was saved during the RF Plan export process above.
Click the "Upload" button to validate the XML exported from the controller.
If there are errors in the XML you will see errors on screen.