Viewing Channel Utilization Alerts; View Channel Utilization In Rf Health Reports; Viewing Controller License Information - Dell PowerConnect W-Airwave Manual

3. Enter the duration evaluation period.
4. Select Add New Trigger Condition.
5. Create a trigger condition for Radio Type and select the frequency to evaluate.
6. Select total, receive, transmit, or interference trigger condition.
7. Set up any restrictions or notifications (refer to the Dell PowerConnect W-AirWave 7.3 User Guide in Home >
Documentation for more details)
8. When finished, select Add.

Viewing Channel Utilization Alerts

1. Navigate to APs/Devices > Monitor or System > Alerts.
2. Sort the Trigger Type column and find Channel Utilization alerts.

View Channel Utilization in RF Health Reports

1. Navigate to Reports > Generated.
2. Find and select a Device Summary or RF Health report.
Figure 18 Channel Utilization in an RF Health Report

Viewing Controller License Information

Follow these steps to view your controller's license information in AMP:
1. Navigate to the APs/Devices > Monitor page of a controller under AMP management.
2. Select the License link in the Device Info section. A pop-up window, shown on
licenses.
Figure 19 License Popup from APs/Devices > Monitor
32 | Dell PowerConnect W-Specific Capabilities in AMP
Figure 19, appears listing all
Dell PowerConnect W-AirWave | Version 7.3