RRP 11.12 Retard Chute Assembly
(See
PL 11.3 500-Sheet Feeder (3 of
Figure 129 Retard Chute Assembly
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the printer from the 500-Sheet Feeder (RRP 11.1 500-Sheet Feeder
Removal).
2.
Remove the paper tray from the feeder.
3.
Remove the Front Cover (RRP 11.2 Front Cover).
4.
Remove the Left Cover (RRP 11.3 Left Cover).
5.
Remove the 500-Sheet Feed Head Assembly (RRP 11.8 Feed Head Assembly).
6.
Tilt the retard chute forward.
7.
Use a screwdriver to pry up the right end of the chute.
8.
Slide the chute to the right and remove.
Replacement
Reinstall the components in the reverse order.
Phaser 5400 Laser Printer Service Guide
3))
339