Configuring The Printer's Tcp/Ip Network Settings With Remoteui - Canon imagePROGRAF iPF830 User Manual

Configuring the Printer's TCP/IP Network Settings With RemoteUI

• If you switch to printing in a TCP/IP network, or if the printer's IP address is changed, see "Configuring the
Destination in TCP/IP Networks ."
• If you switch to printing in a Bonjour network, see "Configuring the Destination for Bonjour Network ."
Configuring the Printer's TCP/IP Network Settings With RemoteUI
Configuring the Printer's TCP/IP Network Settings With RemoteUI
Follow the steps below to configure the TCP/IP network settings.
When using an IPv4 IP address
1
Start the web browser and enter the following URL in the Location (or Address ) box to display the Remo-
teUI page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2
Select Administrator Mode and click Logon.
Note
3
Click Network in the Device Manager menu at left to display the Network page.
4
Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settings
page.
5
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dynamic
Update
Use Zeroconf Func-
tion
IP Address
Subnet Mask
Gateway Address
LPD Printing
IPP Printing
IPP Printer URI
RAW Printing
RAW Mode Bi-direc-
tion
FTP Printing
Use Discovery
484
Scope
SMTP Server Ad-
dress
Primary DNS Server
Address
Secondary DNS
Server Address
P.487
➔
•
If a password has been set on the printer, enter the password.
Activate this setting to use DHCP for configuring the IP address.
Activate this setting to use BOOTP for configuring the IP address.
Activate this setting to use RARP for configuring the IP address.
Activate this setting to perform DNS server registration automatically.
Activate this setting to use Bonjour.
Specify the printer's IP address.
Specify the printer's subnet mask.
Specify the printer's default gateway.
Activate this setting to use LDP Printing.
Activate this setting to use IPP Printing.
Specify the URI of the printer used for IPP printing using up to 252 charac-
ters.
Activate this setting to use Raw Printing.
Activate this setting to use Raw mode bidirectional communication.
Activate this setting to use FTP Printing.
Activate this setting to use SLP Discovery function.
Enter the SLP search range.
Specify the SMTP server's IP address.
You can also specify the SMTP server domain name, if desired.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Details
iPF830
P.487
➔
Default Setting
Off
Off
Off
Off
On
0.0.0.0
0.0.0.0
0.0.0.0
On
On
printer
On
Off
On
On
default
0.0.0.0
0.0.0.0
0.0.0.0
User's Guide