5.2
Set the IP address for the printer and activate the protocol to be used.
"2.2.1 Setting IP Address" on how to set IP address
5.2.1
Set the IP address
When using the printer in a TCP/IP environment, the IP address, subnet mask, and
gateway address must be set on the printer.
See the manual provided with the printer for how to set the IP address.
5.2.2
Activating the Protocol
The factory setting of each protocol is set as Enabled. The following procedure is not
necessary when you are setting up the network for the first time using a new printer.
5
To use CentreWare Internet Services‚ use the control panel to activate
InternetServices for Protocol.
For information on the method of activating protocols, see the "User Guide".
132
Configuring the Printer