Table of Contents
Advertisement
7
When the printer driver has been installed, click Finish or Exit at each
of the dialog box to close the Fuji Xerox Setup Menu.
8
Take out the CD-ROM from the CD-ROM drive.
Testing Printing
To check the connection, print the test page.
The procedure is as follows:
Procedure
1
Click the Start menu, and select Settings and then Printers.
The Printers windows is displayed.
2
The DocuPrint 181/211 printer icon has been added by the installation
of the printer driver. Double-click this added printer icon and click
Properties from the Printer menu.
The printer properties dialog box is displayed.
3
Click Print Test Page on the General tab.
A dialog box to confirm whether or not the test page is printed correctly will be
displayed.
4
Check the print results, and if the test page is printed correctly, click
Yes.
5
Click OK on the printer properties dialog box.
3.4 Configuring the Client
3
87
Advertisement
Table of Contents
