Table of Contents
Advertisement
4. Enter the items at each text box.
Example: For IP address, "129.249.242.179".
Item
Printer Name or IP
Address
Port Name
When you do not know the IP address of the printer, either check with the network
administrator, or print out the Printer Settings to confirm. Refer to "2.2.3 Checking the
Settings (Printing Printer Settings)" on how to print the Printer Settings.
5. Click Next.
6. Check the contents on the screen and click Finish.
This completes setting LPR for the protocol. Do the settings for Port 9100 after the printer
driver is installed. Just proceed to the next step from here.
7
When the printer driver has been installed, click Finish or Exit at each
dialog box to close the Fuji Xerox Setup Menu.
2.4 Configuring Windows NT 4.0/Windows 2000/Windows XP
Enter the IP address of the printer. You can enter the
registered printer name when it is possible to use name
solving services like WINS.
When the IP address has numbers with less than three
digits, do not enter "0" before these numbers, e.g.
"XXX.XXX.00X.0XX". It will not work properly.
Enter name or IP address of the printer and the name of port
is automatically set. Enter the port name only when you
want to make changes.
Remarks
2
43
Advertisement
Table of Contents
