Table of Contents
Advertisement
6.3
This section describes how to set up the e-mail system.
You do not need to configure the items listed below on the control panel. Configure
these items in CentreWare Internet Services
Device E-mail Address
G
SMTP Server Address
G
POP3 Server Address
G
POP User Name
G
POP Password
G
POP3 Server Polling Interval
G
APOP Settings
G
Permitted E-mail Address1
G
Permitted E-mail Address2
G
Password for Only Read Data
G
Password for Full Access
G
Recipient E-mail Address
G
Notification Items
G
Status E-mail Sending Interval
G
Transport Protocol-TCP/IP
G
CentreWare Internet Service Settings are made in Administrator Mode at the time of
manufacture. For this reason, you need to enter the administrator name and password
to change these setting
The administrator name and password set at the time of manufacture are shown below. To
6
ensure security, change the administrator name and password immediately after installing the
printer. Use CentreWare Internet Services to change the administrator name and password.
Administrator name: admin
G
Password: admin
G
For more information about CentreWare Internet Services, refer to "Chapter 5 Using
CentreWare Internet Services".
Follow the procedure below to set up the e-mail environment.
Procedure
1
Turn on the computer and start your Internet browser.
This following description makes use of Microsoft
running on Windows
150
Making CentreWare Internet
Services Settings
®
2000.
(Default: none)
(Default: 0.0.0.0)
(Default: 0.0.0.0)
(Default: none)
(Default: none)
(Default: 30 minutes)
(Default: off)
(Default: none)
(Default: none)
(Default: Use Password is off)
(Default: Use Password is off)
(Default: none)
(Default: warning only)
(Default: 1 minute)
®
Internet Explorer 5.5
Advertisement
Table of Contents
