Table of Contents
Advertisement
3.3 Changing the Host Name and Workgroup Name
Item
WINS
Secondary
Server Address
Administrator
Name
Administrator
Password
3
Location
Reboot
84
Remarks
Enter the IP address of another WINS
server when the WINS address is not
obtained from the DHCP server and
there are at least two WINS servers. If
this has been entered and the WINS
1st server does not work, this server
can be used as the WINS server.
When WINS is not used, enter
"0.0.0.0".
Up to 20 alphanumeric characters can
be used.
Up to 14 alphanumeric characters can
be used. However, the password set
is not displayed after the printer is
rebooted.
Comments about the location for
setting (like installation floor) can be
entered.
If Yes is set, the printer will be
automatically rebooted after editing
the config.txt file.
Factory
Value
Setting
0.0.0.0
Maximum 20
ADMIN
bytes
Maximum 14
admin
bytes
(not displayed)
Maximum 48
bytes
Yes or No
No
Advertisement
Table of Contents
