Table of Contents
Advertisement
6
Using Notepad, open the config.txt icon displayed.
Use Notepad to edit the config.txt file. If other editors are used, and you change Reboot to ON
for the config.txt file, the editors might not function temporarily.
7
If necessary, change each item and then save the config.txt by
overwriting it.
If you copy the config.txt file onto the client and edit it, the edited file might not be able to be
saved into the admintool folder. Before copying the config.txt file from the client, delete the
config.txt file inside the admintool folder.
Workgroup: can be set up to 15 bytes.
G
Host Name: printer name; can be set up to 15 bytes.
G
For details of the config.txt file, refer to the section after this procedure, "Setting Format of
G
Config.txt File".
When a config.txt file is saved, a message.txt file will be created in the admintool
folder. You can use the message.txt file to check if the settings based on the config.txt
file is effective or not.
3.3 Changing the Host Name and Workgroup Name
3
81
Advertisement
Table of Contents
