1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Printer
  5. Phaser 2135
  6. User manual

Xerox Phaser 2135 User Manual

Color printer
Hide thumbs Also See for Phaser 2135:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual, Quick Reference Manual
P H A S E R
2 1 3 5
®
C O L O R P R I N T E R
U s e r G u i d e

Advertisement

Table of Contents
loading

Related Manuals for Xerox Phaser 2135

Summary of Contents for Xerox Phaser 2135

  • Page 1 P H A S E R 2 1 3 5 ® C O L O R P R I N T E R U s e r G u i d e...
  • Page 3 Phaser 2135 Color Printer ® User Guide 071-0748-00 March 2001...
  • Page 4 Copyright © Xerox Corporation. Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. ® ® Phaser , PhaserShare , ColorStix ® ®...
  • Page 5 PANTONE Color simulations are only obtainable on this product when driven by qualified Pantone-licensed software packages. Contact Pantone, Inc. for a current list of qualified licensees. All trademarks noted herein are either the property of Xerox Corporation, Pantone, Inc., or their respective companies. © Pantone, Inc., 1988.
  • Page 6 Printer Warranty Xerox warrants that the Phaser 2135 Printer will be free from defects in materials and workmanship for a period of one (1) year from the date of shipment. If the product proves defective during the warranty period, Xerox, at its option, will:...
  • Page 7 (1) year from date of shipment. Under this warranty, the Customer must notify Xerox or its authorized service representative of the defect before the expiration of the warranty period. XEROX MAY REQUIRE THAT THE DEFECTIVE CRC BE RETURNED TO A DESIGNATED XEROX DEPOT OR THE XEROX REPRESENTATIVE FROM WHICH THE CRC WAS ORIGINALLY PURCHASED.
  • Page 8 Acts or cause any part or all of this warranty to be void, is called a "Non-excludable Condition". To the full extent permitted by law, Fuji Xerox’s sole and total liability to the customer for a breach of any Non-excludable Condition (including for any consequential loss suffered by the customer) is limited, except as otherwise stated herein, to (at Fuji Xerox’...
  • Page 9 Your printer and the recommended consumable supplies have been designed and tested to meet strict safety requirements. Attention to the following notes will ensure the continued safe operation of your printer. Electrical Safety Use the power cord supplied with your printer. Do not use a ground adapter plug to connect the printer to a power source receptacle that lacks a ground connection terminal.
  • Page 10 If any of the following conditions occur, switch off the printer power immediately, disconnect the power cord, and call an authorized service representative. The power cord is damaged or frayed. Liquid is spilled into the printer. The printer is exposed to water. Any part of the printer is damaged.
  • Page 11 Exercise care in moving or relocating the printer, it is back-heavy and could tip backward. Follow the recommended procedure when moving the printer from one location to another. Refer to the Phaser 2135 Setup Instructions. Do not place any liquids on the printer.
  • Page 12 Do not switch off the printer power while printing. Do not move the printer while printing. 0748-03...
  • Page 13 Symbols as marked on product: DANGER high voltage: 0748-04 Protective ground (earth) terminal: 0748-05 Hot surface on or in the printer. Use caution to avoid personal injury: 0748-07 0748-06 Use caution. Refer to the manual(s) for information: 0748-09 Warning If the product loses the ground connection, usage of knobs and controls (and other conductive parts) can cause an electrical shock.

  • Page 15: Table Of Contents

    Contents Xerox Supplies and Accessories ..... . . 1 Front Panel Usage ....... . . 10 Basic Menu Navigation .
  • Page 16 Phaser 2135 Color Printer...

  • Page 17: Xerox Supplies And Accessories

    When the front panel prompts you that a supply is low or needs to be replaced, make sure that you have replacements on hand. To order supplies and accessories, contact your local dealer or visit the Xerox web site: www.xerox.com/officeprinting/supplies/...
  • Page 18 Item Black Cyan Magenta Yellow This is an example of 5 percent coverage per color (20 percent coverage per page). 0748-12 Part Number 016-1917-00 016-1918-00 016-1919-00 016-1920-00 Part Number 016-1913-00 016-1914-00 016-1915-00 016-1916-00 Phaser 2135 Color Printer...

  • Page 19: Imaging Drums

    Imaging Drums Imaging drum life expectancy is up to 30,000 letter-size pages based on continuous printing. The following customer usage patterns may significantly reduce imaging drum life: printing jobs of less than 5 pages, opening and closing the top cover, turning the printer off and on, printing on transparencies or specialty papers, printing short-edge feed, printing larger than letter-size print jobs and automatic two-sided printing.

  • Page 20: Transfer Belt

    5 pages, opening and closing the top cover, turning the printer off and on, printing on transparencies or specialty papers, printing short-edge feed, printing larger than letter-size print jobs, and automatic two-sided printing. Item Transfer Belt 0748-14 Part Number 016-1925-00 016-1926-00 Part Number 016-1927-00 Phaser 2135 Color Printer...
  • Page 21 If the automatic duplex unit is installed, it must be removed along with Tray 1 when replacing Tray 1. Trays 2-5 550 sheets of 75 g/m Supplies Xerox Phaser Professional Printing Paper Item Size Phaser Premium Color Printing Paper 90 g/m (24 lb.
  • Page 22 Xerox Phaser Professional Printing Paper (cont'd.) Item Size Phaser Premium Cover Paper 160 g/m (60 lb. cover) Xerox Phaser 35 Series Transparency Film Item Size Premium A/Letter (U. S.) 8.5 x 11 in. Premium A4 (Metric Letter) 210 x 297 mm Standard A/Letter (U.
  • Page 23 Xerox Phaser Color Laser Labels Size A4 (Metric Letter) 210 x 297 mm (176 g/m A4 (Metric Letter) 210 x 297 mm (176 g/m Xerox Phaser Premium Business Cards Item A/Letter (U.S.) 8.5 x 11 in. (50 lb. bond) A4 (Metric Letter)
  • Page 24 Provides support for Secure Print and Proof Print jobs Enables TIFF and PDF printing Automatic Duplex Unit Features Automatic 2-sided printing with the Duplex Unit Increased printing versatility and convenience Allows Booklet printing feature Part Number 2135HD Part Number 2135DPX Phaser 2135 Color Printer...

  • Page 25: Additional Memory

    Additional Memory Feature 64 Mbytes 128 Mbytes 256 Mbytes 512 Mbytes Note 256-Mbyte DIMMs must be used alone or as a pair. They cannot be used in combination with any other size of memory. Lower Tray Assembly Feature Paper capacity is 550 sheets of 75 g/m paper Up to two lower tray assemblies can be installed Lower Tray Deck...

  • Page 26: Front Panel Usage

    Cancel a print job quickly. Front Panel Buttons On-line indicator light Fault indicator light Two-line display On-line button Enter button Menu Up button Menu Down button Item Up button Item Down/Cancel button Value Up button Value Down button Phaser 2135 Color Printer 0748-16...

  • Page 27: Basic Menu Navigation

    Basic Menu Navigation For a description of the menu system, items and values, see the Advanced Features and Troubleshooting Manual on the CD-ROM. Press Menu Up or Menu Down to scroll the available menus; until Menu Name is the current menu. Menus Menu Name Press Item Up or Item Down to scroll the submenu (all menus...

  • Page 28: Printing The Menu Map

    At the front panel, press Menu Up or Menu Down until you select Print Menu Map. Press Enter to print the page. The Menu Map page is printed and the printer is automatically ready for the next print job. Phaser 2135 Color Printer...

  • Page 29: Print Modes

    Print Modes Print Modes Standard Recommended for basic office printing, 600 x 600 dpi. Enhanced Makes very fine lines, sharp edges, and small text sharper; 600 x 1200 dpi. From the printer’s front panel: Use the Menu buttons to scroll to PostScript Menu. Use the Item buttons to scroll to Print Mode.

  • Page 30: Color Modes

    You can select the Color Mode in the front panel or software driver. For more detailed information on Color Modes, refer to the Advanced Features and Troubleshooting Manual on the CD-ROM, or see the on-line help in the driver. The software driver overrides front panel settings. Phaser 2135 Color Printer...
  • Page 31 Process Grayscale Prints black areas of your image with cyan, magenta, and yellow toner making blacks appear richer. Unspecified RGB Xerox RGB: Produces lighter color prints than sRGB. Interpretation sRGB: Settings that are defined by the sRGB standard. (Only available in Custom RGB: Allows you to select your Gamma and the driver.)

  • Page 32: Paper Tips

    27. For best results, use Xerox Phaser paper; it is guaranteed to produce excellent results on your Phaser 2135 printer. A low-paper message is displayed when there are approximately 30 to 40 sheets of paper remaining in the paper tray.
  • Page 33 Always keep media in a sealed package to avoid the effects of humidity, which can affect print quality. If you use non-Xerox paper, make sure that it meets the following criteria: Weight range: 60 Smooth surface Intended for laser printers Do not use wrinkled or damaged paper.

  • Page 34: Supported Page Sizes And Print Area

    310 x 440 mm 5 mm .2 in. 318 x 443 mm 5 mm .2 in. 172 x 247 mm 5 mm .2 in. Phaser 2135 Color Printer Sides .2 in. .2 in. 5 mm .2 in. .2 in. .2 in. 5 mm .2 in.
  • Page 35 Supported page sizes and print area (cont’d.) Media Page size JIS B4 257 x 182 mm 10.1 x 7.16 in. 148 x 210 mm 5.83 x 8.27 in. Executive 7.25 x 10.5 in. 184 x 266 mm Statement* 5.5 x 8.5 in. 140 x 215 mm 8 x 10 in.* 8.0 x 10.0 in.

  • Page 36: Universal Tray

    Paper Specifics 550-sheet capacity (20 lb. bond paper) 60-163 g/m (16-43 lb. bond paper) Use Xerox Phaser Professional Printing Paper. Refer to page 5 for ordering supplies. The universal tray supports paper and specialty media types in the following table:...
  • Page 37 60-75 g/m (16-20 lb. bond) For supported paper sizes, see page 18. Note Specialty papers such as thick card stock, envelopes, Xerox Phaser Laser Labels, and Xerox Phaser Premium Business Cards must be loaded in the Multi-Sheet Bypass Feeder (MBF) only.
  • Page 38 Transparencies can be used in Tray 1 or the Multi-Sheet Bypass Feeder (transparencies are not supported in Trays 2-5). Use only Premium or Standard Xerox Phaser 35 Series Transparencies. See page 1 for supplies ordering information. For information on Xerox Phaser transparencies, visit the Xerox web site: www.xerox.com/officeprinting/trans/...
  • Page 39 Universal Tray Loading (Tray 1, 2, 3, 4, or 5) Each tray holds up to 550 sheets of 75 g/m Capacity is reduced for heavier or thicker stock. The top output tray on top of the printer holds up to 500 sheets and the Side Output Tray at the left hand side of the printer holds up to 100 sheets of 75 g/m lb.) bond paper.
  • Page 40 Universal Tray. Do not load paper or transparencies above their fill lines because it may cause a jam. Paper: 550 sheets (75 g/m Transparency: 250 Standard or 200 Premium sheets 0748-25 /20 lb. bond paper) 0748-26 Phaser 2135 Color Printer...
  • Page 41 Insert a stack of paper into the Universal Tray. For proper print orientation: Place the side to be printed face-down. Long-Edge Feed (LEF) Prepunched holes should be on your right as you face the printer. Letterhead should be at the back of the tray. It is strongly recommended that you use long-edge feed (LEF) for Letter, A4, and JIS B4 paper sizes.
  • Page 42 The front panel prompts you to select the loaded media type. Press the Value buttons to select an option listed: Front Panel Media Options Media Type Plain paper Phaser 2135 Transparency * Heavy paper Glossy paper * Thin card stock Light paper * Use only in Tray 1 or the Multi-Sheet Bypass Feeder (MBF).

  • Page 43: Multi-Sheet Bypass Feeder (Mbf)

    60-203 g/m (16-54 lb. bond). The MBF supports the following paper and specialty media types: Supported Media Supported Media Plain paper Xerox Phaser Premium Color Printing Paper 90 g/m (24 lb. bond) Other plain paper 75-90 g/m (20-24 lb. bond)
  • Page 44 (16-20 lb. bond) For information on loading transparencies, see page 32. Use Xerox Phaser 35 Series Transparencies only. When sending a Multi-Sheet Bypass Feeder job from the driver, the printer prompts you to load the correct media if the media does not match what you previously loaded.
  • Page 45 Loading the Multi-Sheet Bypass Feeder (MBF) Open the Multi-Sheet Bypass Feeder tray and unfold the two extensions (a). Open the Side Output Tray on the left side of the printer and swing out the two extensions where the media will exit (b). The Multi-Sheet Bypass Feeder does not automatically detect paper size.
  • Page 46 Insert the media and adjust the guide for the media width: For Xerox Phaser 35 Series Transparencies, refer to page 32. For Xerox Phaser Color Laser Labels, refer to page 35. For envelopes, refer to page 33. For Xerox Phaser Premium Business Cards, refer to page 35.
  • Page 47 The front panel prompts you to select the loaded media type and size. Press the Value buttons to select a media type: Media Type Options Media Type Options Plain paper Phaser 2135 Transparency Heavy paper Glossy paper Thick card stock Thin card stock Labels...

  • Page 48: Loading Specialty Media In The Multi-Sheet Bypass Feeder (Mbf)

    Loading Specialty Media in the Multi-Sheet Bypass Feeder (MBF) Xerox Phaser 35 Series Transparencies Insert the transparencies (maximum capacity is 50 Standard or Premium sheets: Place the transparencies Long-Edge Feed (LEF). Adjust the Multi-Sheet Bypass Feeder guides for the width of your transparencies.
  • Page 49 Envelopes Guidelines for envelope printing: Caution Never use envelopes with windows or metal clasps; they will damage the printer. Envelopes must be fed Long-Edge Feed (LEF). Do not print on the back of the envelope. Keep unused envelopes in their packaging to avoid the effects of moisture and dryness, which can affect print quality and cause wrinkling.
  • Page 50 Press the Value buttons to select the appropriate size. Press the Enter button to save your selection. Make a test print from your application to confirm the correct orientation of your envelope. Send the job to the printer. 0748-33 Phaser 2135 Color Printer...
  • Page 51 Do not use sheets with missing labels or business cards. Adjust the Multi-Sheet Bypass Feeder guides for the width of your Xerox Phaser Color Laser Labels or Xerox Phaser Premium Business cards. Open the Side Output Tray on the left side of the printer.

  • Page 52: Automatic 2-Sided Printing From The Paper Tray

    Damage caused by using unsupported media for 2-sided printing is not covered by the printer’s warranty. Load 75-120 g/m Tray. The front side is face-up in the tray. (20-32 lb. bond) paper in the Universal Phaser 2135 Color Printer (24 lb. bond) laser...
  • Page 53 Long-Edge Feed (LEF) The top of the first page to be printed should be toward the back of the printer. It is strongly recommended that you use long-edge feed (LEF) for Letter, A4, and JIS B4 paper sizes. Short-Edge Feed (SEF) Place the top of the first page to be printed on the left side as you face the printer.
  • Page 54 Under 2-Sided Printing, select the binding preference how the page turns. Long-Edge binding or Flip on long edge, where Landscape orientation is Short-Edge binding or Flip on short edge. Send the job to the printer. and Portrait orientation is (b). 0748-37 0748-39 Phaser 2135 Color Printer 0748-38 0748-40...

  • Page 55: Manual 2-Sided Printing

    Manual 2-Sided Printing Manual 2-sided printing can be done from the Multi-Sheet Bypass Feeder (MBF) or from the universal trays. Media Specifics Use only the following paper types for manual 2-sided printing: Plain paper Heavy paper Glossy paper Thick card stock Thin card stock For the best opacity and feed reliability, use laser paper that is 90 g/m...

  • Page 56: Printing Side 1

    Insert paper with the first side to be printed face-down. Long-Edge Feed (LEF) The top of the page should be toward the back of the tray. It is strongly recommended that you use long-edge feed (LEF) for Letter, A4, and JIS B4 paper sizes. 0748-27 Phaser 2135 Color Printer...
  • Page 57 Short-Edge Feed (SEF) The top of the page should be toward the right of the tray. Adjust the width and length guides to match the size of your paper. User Guide 0748-42...
  • Page 58 (SEF). Short-Edge Feed (SEF) The top of the page should be toward the printer. Adjust the Multi-Sheet Bypass Feeder guides to fit the width of your paper. 0748-43 0748-44 Phaser 2135 Color Printer...
  • Page 59 The front panel prompts you to select the loaded media type. Press the Value buttons to select a media type: Media Type Options Media Type Options for 2-Sided Printing Plain paper Heavy paper Glossy paper Thick card stock Thin card stock Note The following media types appear in the front panel but should not be used for 2-sided printing:...

  • Page 60: Printing Side 2

    Insert paper with the second side to be printed face-down. Long-Edge Feed (LEF) The top of the page should be toward the back of the tray It is strongly recommended that you use long-edge feed (LEF) for Letter, A4, and JIS B4 paper sizes. 0748-45 Phaser 2135 Color Printer...
  • Page 61 Short-Edge Feed (SEF) The top of the page should be toward the left of the tray. Adjust the width and length guides to match the paper size. From the MBF (Multi-Sheet Bypass Feeder): Load the second side to be printed face-up. Long-Edge Feed (LEF) The top of the page should be toward the right of the MBF.
  • Page 62 Short-Edge Feed (SEF) The top of the page should be toward the printer. 0748-48 Adjust the width and length guides to match the paper size. Phaser 2135 Color Printer...
  • Page 63 The front panel prompts you to select the loaded media type. Press the Value buttons to select a media type: Media Type Options Media Type Options for 2-Sided Printing Plain paper Heavy paper Glossy paper Thick card stock Thin card stock Note The following media types appear in the front panel but should not be used for 2-sided printing:...

  • Page 64: Troubleshooting Print Quality Problems

    Press Enter to print the pages. Note Also observe the procedures for cleaning the printer and adjusting the Color Balance outlined in Cleaning the Printer in the Advanced Features and Troubleshooting Manual available on the CD-ROM. Phaser 2135 Color Printer...
  • Page 65 If the information provided in this section does not solve your print problem, refer to Getting Help on page 61. Print Defects and Potential Remedies Print Quality Problem Background Smudges Unwanted black and/or colored or shaded areas that appear on the page.
  • Page 66 One of the rollers in an imaging drum are scratched or damaged. The transfer belt may be damaged. Phaser 2135 Color Printer Potential Remedies Clean each of the LED bars using the cleaning pad supplied with the toner cartridge, or an alcohol wipe from the Cleaning Kit.
  • Page 67 Print Defects and Potential Remedies (cont'd.) Print Quality Problem Every 44 mm or 1.75 inches of the same color 0748-53 Back-Side Contamination Toner has been deposited on the non-imaged side of a print. 0748-54 User Guide Common Causes One of the rollers in an imaging drum are scratched or damaged.
  • Page 68 An LED bar may be misaligned. An imaging drum may be misaligned. The transfer belt may be misaligned. Phaser 2135 Color Printer Potential Remedies Turn the printer off, wait 10 seconds, turn the printer on. The printer performs an automatic registration.

  • Page 69: Clearing Media Jams

    Preventing media jams To reduce the frequency of paper and transparency jams, use only Xerox Phaser paper, Xerox Phaser labels, and Xerox Phaser 35 Series Transparencies. See page page 5 for ordering supplies. Fan media prior to loading in the Universal Tray or Multi-Sheet Bypass Feeder.
  • Page 70 Be careful not to touch the toner on jammed media as the toner has not been fused to the paper and rubs off. Note Inside the printer, all handles and points of user interaction for removing jammed media are green. Phaser 2135 Color Printer...
  • Page 71 Top Cover Jam Follow these steps to clear a jam at the top cover: Open the top cover. Avoid touching or handling the LED bars. Using the black handles, lift out each toner cartridge/image drum assembly. User Guide 0748-56 0748-57...
  • Page 72 Do not place the imaging drums (or the bottom of each toner cartridge/imaging drum assembly) on the edge of the table or an uneven or rough surface. Exposure to rough or uneven surfaces may result in print quality defects. 0748-58 Phaser 2135 Color Printer...
  • Page 73 Locate the jammed media in the transfer belt area area (b). Remove the jammed media from the transfer belt area. Remove the jammed media from the fuser area by up the left release lever, and necessary, remove the fuser for better access to the jammed media.
  • Page 74 Replace the toner cartridges/imaging drum assemblies. Slowly lower the top cover into place. 0748-62 0748-63 Phaser 2135 Color Printer...

  • Page 75: Duplex Unit Jam

    Right Door Jam Follow these steps to clear a jam from a right door: Open the right side door transparencies (b). Close the right door. Duplex Unit Jam Follow these steps to clear a jam from the duplex unit: Pull the duplex unit straight out until it stops. Tray 1 pulls out with the duplex unit.
  • Page 76 Follow these steps to clear a misfeed from a right door or universal tray: Open the right side door transparencies (b). Pull to open the Universal Tray and remove any jammed paper or transparencies. Reinsert the Universal Tray. and remove jammed paper or 0748-64 0748-66 Phaser 2135 Color Printer...

  • Page 77: Getting Help

    On the front panel, press the Menu buttons to scroll to Support; press the Item buttons to scroll to Print Help Guide. Press Enter to print the pages. Printer CD-ROM Phaser 2135 Color Printer User Guide Advanced Features and Troubleshooting Manual Setup Guide poster Printer drivers...

  • Page 78: Xerox Web Site

    Downloading printer drivers Finding your local reseller On-line documentation infoSMART™ Knowledge Base www.xerox.com/officeprinting/infoSMART/ infoSMART™ is the same troubleshooting knowledge base used by Xerox Customer Support staff to provide the latest technical information on: Application issues Networking issues Printer errors Print-quality issues...
  • Page 79 Other on-line services Subscribe to email update notices: Technical Support To find a local reseller See www.xerox.com/officeprinting/contacts for the most updated information. U. S. 1-800-835-6100 User Guide www.colorconnection.xerox.com www.xerox.com/officeprinting/support Canada 1-877-662-9338 Outside U.S. and Canada Contact your local Xerox office for a list of...

  • Page 80: Customer Support Center

    Customer Support Center See www.xerox.com/officeprinting/contacts for the most updated information. U. S. and Canada 1-800-835-6100 Argentina (54) 11 478 5481 Australia 1-800-811-177 Austria 01526 0404 Belgium 02 720 9602 Bolivia 13 469 090 Brazil 5511 3741 6366 Chile 800 200 600...

  • Page 81: Specifications

    Black Toner Cartridge Cyan Toner Cartridge Magenta Toner Cartridge Yellow Toner Cartridge Supplies Start up kit Product Use: XEROX Phaser® 2135 Color Printers SECTION 2 - INFORMATION ON INGREDIENTS Ingredients (percent by weight) Polymer (85-95 percent) Wax (2-10 percent) Black toner: carbon black...
  • Page 82 HANDLING: No special precautions, when used as intended. STORAGE: Avoid high temperatures. SECTION 8 - EXPOSURE CONTROL - PERSONAL PROTECTION No special personal protection indicated, when used as intended in Xerox Phaser® color printers. THRESHOLD LIMIT VALUE (TLV): 10 mg/m...
  • Page 83 HAZARDOUS DECOMPOSITION PRODUCTS: During a fire, toxic gases may be generated by thermal decomposition or combustion. SECTION 11 - TOXICOLOGICAL INFORMATION This material has been evaluated by Xerox Corporation. The toxicity data noted below is based on test results of similar toners. Oral LD : >...
  • Page 84 EPA testing protocol. The test toner was ten times more respirable than commercially available Xerox toner and would not be functionally suitable for Xerox equipment. SECTION 12 - ECOLOGICAL INFORMATION Aquatic 96 hour LC : >...

  • Page 85: Material Safety Data Sheets

    Chemical name and synonyms: Isopropyl Alcohol Chemical formula: CH CH(OH)CH Emergency telephone numbers: CHEMTREC (Transportation): 1-800-424-9300 Product Use: Xerox Phaser SECTION 2 – INFORMATION ON INGREDIENTS Component CAS# percent OSHA PEL (ppm) ACGIL TLV (ppm) Isopropyl alcohol 67-63-0 91.0 400 400 Deionized water 7732-18-5 9.0 NA NA...
  • Page 86 HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide SECTION 11 – TOXICOLOGICAL INFORMATION Not Available Section 12 – Ecological Information Not Available. SECTION 13 – DISPOSAL CONSIDERATIONS Follow Federal, State and Local Regulations. Phaser 2135 Color Printer...
  • Page 87 SECTION 14 – TRANSPORT INFORMATION DOT CLASSIFICATION: Not Regulated. Proper Shipping Name: Hazard Class: UN Number: Packing Group: Hazard Labeling: IATA / ICAO CLASSIFICATION: Not Regulated. Proper Shipping Name: Hazard Class: UN Number: Packing Group: Hazard Labeling: IMDG CLASSIFICATION: Not Regulated. Proper Shipping Name: Hazard Class IMDG Page #...
  • Page 88 All information used must be determined by the user to be in accordance with applicable federal, state and local laws and regulations. Prepared by: CleanTex Products 33 Murray Hill Drive Nanuet, NY 10954 June 1997 Phaser 2135 Color Printer...
  • Page 89 Section 1 – Product Identification Product Name and manufacturer LED Lens Cleaner, included in Phaser ® 2135 toner cartridge boxes. Nagahori Pharmaceutical Co., Ltd. Tokyo Product Use: XEROX Phaser ® 2135 color printers SECTION 2 - INFORMATION ON INGREDIENTS Ingredients Ethyl alcohol Product is distributed as a single-use, presaturated pad, in which all the ethyl alcohol liquid is absorbed by the paper applicator.
  • Page 90 Do not take internally. THRESHOLD LIMIT VALUE (TLV): 1000 parts per million (ppm), 8 hour TWA. PERMISSIBLE EXPOSURE LIMIT (PEL): 1000 ppm, 8 hour TWA SHORT TERM EXPOSURE LIMIT (STEL): None established Phaser 2135 Color Printer...
  • Page 91 SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE/ODOR: Ethyl alcohol is a clear, colorless liquid with a characteristic odor. Cleaning pad is a white paper pad saturated with ethyl alcohol. The following data is for ethyl alcohol liquid BOILING POINT: 173 degrees F (78 degrees C) SOLUBILITY IN WATER: Miscible EVAPORATION RATE (Butyl acetate = 1): >1 VAPOR DENSITY (Air = 1): 1.59...
  • Page 92 SECTION 16 - OTHER INFORMATION NFPA 704: Health-1, Fire-3, Reactivity-0 Original preparation date: 11/7/00 Xerox Corporation Office Printing Business Environmental, Health & Safety P.O. Box 1000 Mail Stop 60-512 Wilsonville, Oregon 97070 MSDS information: 503-685-4093 Transportation Emergency (Chemtrec): 800-424-9300 Phaser 2135 Color Printer...

  • Page 93: Index

    Index automatic 2-sided printing 36 duplex unit part number 8 black and white print mode 14 cleaning kit part numbers 7 Color Connection 62 color correctionprint modes adjusting 14 duplex unit part number 8 email notification service 63 enhanced print mode 13 envelopes printing 33 fuser part number 4...
  • Page 94 13 Multi-Sheet Bypass Feeder (MBF) loading 29 media specifics 27 page size, image area supported sizes 18 paper part numbers 5 printing tips 16 universal tray usage 20 paper feed roller kit part numbers 3 Phaser 2135 Color Printer...
  • Page 95 paper numbers paper feed roller kit 3 part number additional memory 9 automatic 2-sided printing unit 8 cleaning kit 7 fuser 4 high capacity toner cartridge 2 imaging drums 3 internal hard drive 8 labels 6 paper 5 printer station 9 standard toner cartridges 2 transfer belt 4 transparency 6...
  • Page 96 Software 62 using printer CD-ROM contents 61 two-sided printing automatic 36 manual 39 universal loading into universal tray 23 universal tray loading media 23 paper specifics 20 part number 5 transparency specifics 20 Xerox web site 62 Phaser 2135 Color Printer...
  • Page 98 Printed on recycled paper 0 7 1 - 0 7 4 8 - 0 0...

Table of Contents