Table of Contents
Advertisement
Applying the New Settings
Procedure
1
When the setting of each item has been specfied, click Apply New
Settings displayed at the lower portion of the right frame.
Click Restore Settings when you do not want to use the settings made and return to the default
settings.
2
The following dialog box will be displayed when the settings are
changed for the first time after having activated CentreWare Internet
Services, and the setting is in administrator mode.
Enter the user name and password, and then click OK.
The factory settings of the
security management, change the settings as early as possible. Use the Network
Settings below Internet Services to make these changes.
user name: admin
G
password: admin
G
3
The contents of the items set will be sent to the printer and the settings
modified. You might need to restart the printer depending on the items.
When prompted with the message to restart the printer, switch off the
printer and then switch it on again.
2.3 Configuring CentreWare Internet Services
name and password are listed below. For better
user
2
31
Advertisement
Table of Contents
