Table of Contents
Advertisement
6
From Printer List, select the printer to be set up and click Configure.
The factory setting of the printer is set as FXnnnnnn ("nnnnnn" is the
last six digits of the Ethernet address set for the network card).
If you do not know the Ethernet address, check with your network administrator or print out the
G
Printer Settings to check. Refer to "4.3.3 Checking the Settings (Printing Printer Settings)" for
information on printing the Printer Settings.
After each object is created, and the environment set up for the printer, the next object name
G
will be displayed in Name of Printer List:
for print server mode → print server name;
for remote printer mode → printer name.
When you cannot make any specific settings to the printer, select Specify Network on the
G
NetWare Search dialog box and search again.
If you do not know the NetWare address, check with your network administrator or print out the
Printer Settings to check.
The Configure dialog box is displayed.
4.3 Configuring Fuji Xerox Network Utility
4
101
Advertisement
Table of Contents
