Table of Contents
Advertisement
When you do not know the IP address of the printer, either check with the network
administrator, or print out the Printer Settings to confirm. Refer to "2.2.3 Checking the
Settings (Printing Printer Settings)" for information on printing the Printer Settings.
4. Click OK.
7
When the printer driver has been installed, click Finish or Exit at each
dialog box to close the Fuji Xerox Setup Menu.
8
Take out the CD-ROM from the CD-ROM drive.
Testing Printing
To check the connection, print the test page.
The procedure is as follows:
Procedure
1
Click the Start menu, and select Settings and then Printers.
The Printers windows is displayed.
2
The DocuPrint 181/211 printer icon has been added by the installation
of the printer driver. Double-click this added printer icon and click
Properties from the Printer menu.
The printer properties dialog box is displayed.
3
Click Print Test Page on the General tab.
A dialog box to confirm whether or not the test page is printed correctly will be
displayed.
4
Check the print results, and if the test page is printed correctly, click
Yes.
5
Click OK on the printer properties dialog box.
2.4 Configuring Windows NT 4.0/Windows 2000/Windows XP
2
35
Advertisement
Table of Contents
