2.5 Configuring Windows 95/Windows 98/Windows Me (TCP/IP Direct Print Utility)
Overview of the Configuration
The overview of the configuration is as follows.
We will use Windows 98 in the procedure as an example.
Begin
↓
Install TCP/IP protocol (not needed when already installed)
G
"2.5.2 Installing TCP/IP Protocol"
2
Install TCP/IP Direct Print Utility and printer driver
G
"2.5.3 Installing TCP/IP Direct Print Utility" , "2.5.4 Installing the Printer Driver"
Check settings
G
"2.2.3 Checking the Settings (Printing Printer Settings)"
Set port
G
"2.5.5 Adding the Port"
↓
End
2.5.2
Installing TCP/IP Protocol
It is not necessary to carry out the following procedure if the TCP/IP protocol has already been
installed on your computer.
To use TCP/IP Direct Print Utility, it is necessary to install TCP/IP protocol on your
Windows system.
The procedure is as follows:
Manuals related to Windows 95/Windows 98/Window Me for details on TCP/IP protocol
Procedure
1
Switch on the computer and activate Windows 98.
56