Configuring The Printer Drivers - Xerox phaser 2135 Advanced Features And Troubleshooting Manual

Printer Drivers

Configuring the Printer Drivers

Be sure to properly configure the printer driver for your printer and its installed options,
such as additional media trays, the hard drive, duplex module, etc. If the printer driver is
not properly configured, optional features such as 2-Sided Printing, Proof Printing, Secure
Printing, Tray 2, 3, 4 and 5 sources, etc. may not be accessible.
To check the printer's configuration, print the Configuration Page:
1. On the front panel, press the Menu Up or Menu Down key (labeled 1 or 5) to scroll
through the available menus until you locate the Printer Setup Menu.
2. Press the Item Up or Item Down key (labeled 2 or 6) to scroll until you see Print
Configuration Page.
3. Press the Enter key (labeled 4) to print that report.
To change the printer's configuration in the Windows 9x printer driver:
Note
The Windows 9x printer driver is automatically configured.
1. At your computer, click Start, select Settings, and click Printers.
2. Open the printer driver properties by right-clicking on the printer icon and clicking
Properties.
3. On the Setup tab, click the Expert Options button.
4. In the Installable Options area of the Expert Options dialog box, highlight an option
that you want to change and select the configuration in the drop-down list.
5. Click OK to close the Expert Options dialog box.
6. Click OK to close the printer driver properties.
To specify the printer's configuration in other printer drivers:
1.
At your computer, open the printer driver properties.
2. Click the Printer Configuration tab.
3.
Enable (check) the items in the driver dialog that are listed on the Configuration Page.
Click OK to close the printer driver properties.
4.
18
Menus
Printer Setup Menu
Printer Setup Menu
Print Configuration Page
Phaser 2135 Color Printer