Table of Contents
Advertisement
7.4
For CentreWare Internet
Services
Condition
Cannot be
Is the printer switched on?
connected to
Is the Ethernet cable
CentreWare
disconnected or loosened?
Internet Services.
Is the internet address
correctly entered?
Is the IP address correctly
entered?
Is the proxy server being
used?
Is the port number correctly
specified?
The message,
The printer might not be
"Please wait"
functioning properly.
remains in the
status display.
At the Properties
Are the OS of the computer
page, even if you
and WWW browser
click the items on
appropriate?
the left frame, the
contents of the
right frame does
not change
accordingly.
The screens
Is the window size of the
cannot be
browser appropriate?
displayed.
The information
displayed is not
updated.
Verification
Press the power switch to "|" to switch it on.
Switch off the power and connect the
Ethernet cable properly.
Check the internet address again. If the
connection still cannot be made despite the
correct address being used, use the IP
address to make the connection.
The IP address might be changed. Print out
the Printer Settings to check the IP address.
If the IP address is wrong, correct it.
"2.2.3 Checking the Settings (Printing Printer
Settings)"
Connection by proxy server cannot be made
sometimes.
Use the WWW browser to change the setting
to one not using the proxy server, or making
connections with the desired address without
using the proxy server.
"5.3 Configuring the WWW Browser"
The factory setting of the port number is 80.
Specify the correct port number.
Wait a while.
If nothing happens, click Refresh.
If nothing happens even if Refresh is clicked,
check if the printer is functioning properly.
Try to use the menus of the browser to
refresh the view.
Also, check if the OS of the computer and the
browser are appropriate.
Change the window size of the browser.
-
Click Refresh.
Solution
7
171
Advertisement
Table of Contents
