Table of Contents
Advertisement
7
Finish making the settings and click Apply New Settings at the bottom.
If you do not want to apply the settings, click Restore Settings at the bottom.
8
When CentreWare Internet Services starts in administrator mode the
first time you access it to change settings, the dialog box below
appears.
Enter the user name (the administrator name) and password, then click
OK.
The administrator name and password set at the time of manufacture are shown below. To
ensure security, change the administrator name and password immediately after installing the
printer. Use Environment Setting in the Internet Services folder to change the administrator
name and password.
Administrator name: admin
G
Password: admin
G
9
The settings are sent to the printer and updated.
You need to restart the printer for some settings to take effect.
If a message prompting you to restart the printer appears, turn off the printer and turn it
on again.
6.3 Making CentreWare Internet Services Settings
6
157
Advertisement
Table of Contents
