Table of Contents
Advertisement
2.5 Configuring Windows 95/Windows 98/Windows Me (TCP/IP Direct Print Utility)
5
Follow the displayed screens to continue with the installation.
I
Setting the Destination Port
To set the destination port, select Others, and click Browse.
In the displayed dialog box, select LPT1, and then click OK.
The adding of the port for TCP/IP Direct Print Utility is carried out after the printer driver has
been installed. Here, we select LPT1.
6
After the printer driver has been installed, click Finish or Exit at each
dialog box to close the Fuji Xerox Setup Menu.
2.5.5
Adding the Port
Add the port for TCP/IP Direct Print Utility to the printer icon created by installing the
printer driver.
The procedure is as follows:
Procedure
1
Click the Start menu, select Settings and followed by Printers.
The Printers window is displayed.
2
The DocuPrint 181/211 printer icon has been added by the installation
of the printer driver. Double-click this added printer icon and from the
Printer menu, select Properties.
The printer properties dialog box is displayed.
2
65
Advertisement
Table of Contents
