Remote Printer Mode
In the remote printer mode, the print server running on the file server sends jobs to the
printer. The printer prints out the jobs retrieved from the print server.
In this mode, the printer does not use up any user license of the file server. However,
you need to have a print server on the network.
For bindery service of NetWare 4.1 or later, connections to print server of 4.x cannot be made.
As such, these bindery services cannot be activated on remote printer mode.
4.1.2
Interface
The following frame types are supported:
Ethernet II specifications
G
IEEE802.3 specifications
G
IEEE802.2 specifications
G
SNAP specifications
G
The frame types are automatically differentiated. However, if you want to specify
specific frame type to be used, it can be done using the control panel, Fuji Xerox
Network Utility, and CentreWare Internet Services (only if TCP/IP environment is
available).
"Chapter 5 Using CentreWare Internet Services" for information on CentreWare Internet
G
Services and "4.3 Configuring Fuji Xerox Network Utility" for information on Fuji Xerox
Network Utility
Manuals bundled with this printer for information of the control panel
G
4.1 Using in NetWare Environment
4
93