Table of Contents
Advertisement
5
Click Install Printer Driver.
6
Follow the displayed screens to carry out the installation.
I
Setting the Destination Port
To set destination port, click Add Port and proceed as follows using the
Add Port dialog box.
1.
Select Network and click Browse.
2. From the network list, search and select the printer. The printer will
be displayed as "host name-p" and will be under the host name icon.
When you do not know the workgroup name and host name of the printer, either check
with the network administrator, or print out the Printer Settings to confirm.
Refer to "3.2.3 Checking the Settings (Printing Printer Settings)" for information on
printing the Printer Settings.
3. Click OK.
4. Click OK on the Add Port dialog box.
7
When the printer driver has been installed, click Finish or Exit at each
of the dialog box to close the Fuji Xerox Setup Menu.
8
Take out the CD-ROM from the CD-ROM drive.
3.4 Configuring the Client
3
89
Advertisement
Table of Contents
