2.3
Configuring CentreWare
Internet Services
CentreWare Internet Services is a software that enables users to display the printer
status or change the printer settings using a WWW browser from a computer on the
network (instead of using the control panel).
The following items cannot be set at the control panel. Change these items using the
CentreWare Internet Services.
When using Windows Internet Name Service (WINS)
Get WINS Server address from DHCP server
G
WINS Primary Server
G
WINS Secondary Server
G
When the SNMP agent is activated
Community Name (Read/Write)
G
Community Name (Trap)
G
Trap Notification (IP)
G
Trap Notification (IPX)
G
Authenticate Error Trap
G
When using Ipd
Time-Out
G
Transport Protocol - TCP/IP
G
ΙP Filter
G
When using Port 9100 (only on Windows 95/98/Me/2000/XP)
Port Number
G
Transport Protocol - TCP/IP
G
IP Filter
G
Time-Out
G
When using IPP (only on Windows Me/2000/XP)
Connect Time-Out
G
Transport Protocol - TCP/IP
G
IP Filter
G
The factory setting of CentreWare Internet Services is in administrator mode. As such,
you will need the administrator name and password to change settings.
(Factory setting: enabled)
(Factory setting: 0.0.0.0)
(Factory setting: 0.0.0.0)
(Factory setting: Nil)
(Factory setting: Nil)
(Factory setting: the Notify
check box is unchecked)
(Factory setting: the Notify
check box is unchecked)
(Factory setting: the Notify
check box is unchecked)
(Factory setting: 16 seconds)
(Factory setting: Disabled)
(Factory setting: 9100)
(Factory setting: Disabled)
(Factory setting: 16 seconds)
(Factory setting: 60 seconds)
(Factory setting: Disabled)
2
17