Table of Contents
Advertisement
7.1.2
When Using the Printer
Condition
Cannot print.
Is the printer switched on?
Is the Ethernet cable
disconnected or loosened?
Are the network environment
settings like the IP address
correctly set?
Is the IP Filter set?
Cannot print.
When setting the network, is
(When Using Port
the same port number used
9100)
on the printer driver
properties settings?
The message,
Check the following items:
"Connection with
(1) The machine is
the printer in
Windows 2000,
(2) The power to the machine
Windows XP or
Windows Me
(3) The IPP port on the
failed," appears
and the IPP printer
cannot be created.
Verification
connected to a network.
is turned on.
machine is activated.
7.1 For TCP/IP Environment
Solution
Press the power switch to " | " to switch it on.
Switch off the power and connect the
Ethernet cable properly.
Settings like the IP address might be
changed. Print the Printer Settings and check
that the settings are correct.
If the settings are wrong, correct them.
"2.2.3 Checking the Settings (Printing
G
Printer Settings)"
"2.2.1 Setting IP Address"
G
Check that IP Filter is selected.
"IP Filter Settings" in "2.3 Configuring
CentreWare Internet Services"
Set the network and check the port number
on the printer driver properties setting. If
different values are set, re-set them to the
same port number.
"Changing Port 9100 Settings" in "2.3
G
Configuring CentreWare Internet Services"
"2.4.3 Installing the Printer Driver (Using
G
Port 9100 on Windows 2000/Windows
XP)"
Check the above and if there is no problem in
settings, check to see that the proxy server
setting is correct.
7
163
Advertisement
Table of Contents
