Table of Contents
Advertisement
7.4 For CentreWare Internet Services
Condition
Even if Apply New
Settings is clicked,
the changes are
not reflected.
When Apply New
Settings is clicked,
the screen turns
white.
Cannot change
settings due to
forgotten
password.
7
172
Verification
Are the values set correctly?
-
-
Solution
Check the values again and re-enter them if
necessary.
Use the browser menus to try to refresh the
view. Or click Refresh.
If you really cannot recall the password,
navigate to 5:Network at the control panel,
and choose YES for Ready to Init. However,
in this case, all network settings will be
returned to factory settings. Before you
proceed to choose YES for Ready to Init, it is
recommended that you print out the Printer
Settings to check the present settings first.
Advertisement
Table of Contents
