2.00 TFD
command (Traffic Display)
Displays traffic measurement
for extensions,
trunk
groups, attendant
consoles and resources.
___.
Command
Format
OPE>TFD + Index + Item1 + (item2)
1
Station
Trunk Group
Al-T
DISA
OGMl
OGM2
AGC
Index
1
2
3
Item1
I
Item 2
The first hatf = 1
The second half = 2
Trunk Group No.
The first half = 1
(01-16)
The second half = 2
All- No.
(1 or 2)
The first half = 1
The second half = 2
The first half = 1 (Tenant 1)
The second half = 2 (Tenant 2)
Description
1. Station
Displays traffic measurements
of all extensions.
2. Trunk Group
Displays traffic measurements
of each trunk
group.
Set desired start time in "System-Operation"
Start
Programming
Time of Traffic Measurement.
Refer to Section 10-C-4.00 "Operation
(OPR)" for
programming.
3. Attendant
Console
Displays traffic measurements
of each attendant
console.
4. DISA, OGMl,
OGM2, AGC
Displays traffic measurements
of each resource.
If tenant service is assigned to the system,
traffic measurements
of each resource will be
displayed by each tenant individually.
15-F-6