Panasonic KX-T336 System Reference Manual page 299

Continued
Item
Numter
12
13
14
15
16
Remote Alarm
17 Destination Address
Assigning Items
Input Value
Print Traffic
Start Time of Traffic
Measurement
Y : print traffic
N : do not print traffic
01 to 12: hour
00 to 59: minute
a.m. or p.m.
Start Time of Test
xx: xxx
01 to 12: hour
00 to 59: minute
AorP : a.m./p.m.
Remote Directory Number
0: none
DN XXXX (XXXX: three or four numeric digits) : Floating
Directory Number
Y : Remote Alarm enabled
N : Remote Alarm disabled
Maximum 26 numeric digits : telephone (modem) number of the
destination for Remote Alarm
Conditions
Item
Number
02
SMDR If set to "N," the following items cannot be programmed:
"Operation (OPR)", (Index Number 2)
Page Length
Skip Perf.
Outgoing Duration Log
Incoming Duration Log
Attendant Duration
Special Carrier Name
Print Secret Dial
Print Error Log
Print Programming
Print Traffic
15
Remote Directory To assign this item, RMT card is necessary,
Number
16,17
Remote Alarm/ Impossible to program if "12"(RMT card) is not assigned in the "Slot
Destination Address Assignment (SLA)." If Remote Alarm is set to "N," Destination Address
cannot be programmed.
10-c-10