Panasonic KX-T336 System Reference Manual page 440

Continued
c
Operation
3. To change the previously
stored data, dial the program
number corresponding to the
desired feature.
Result
Comment/Note
l
To assign DSS(ICM) feature,
1) Dial "2." 1) The following message
ABC
•l
appears on the diaplay:
2
MOl/P : DSS(ICM)
2) Dial ICM number (one or 2) The following message
l
If the dialed number does not
two digit(s)).
appears on the display:
exist as an ICM number, alarm
tone sounds.
l
To assign One Touch Dialing
feature,
l
If you want to clear a wrong
entry, press the CLEAR button
and dial the correct number.
1) Dial "3."
1) The foltowing message
appears on the display:
MOl/P :
I
2) Dial a telephone number 2) The following message
l
Up to 16 digits can be stored.
or a feature number. appears on the display:
<Example> when entering a
l
You can enter: 0 to 9, * , #,
, MO,,P ;le;trg;qmber: ;E;ey.ash, - (hyphen),
&xample> when entering a
feature number:
1 MOl/P :
01 1
l
If you want to clear a wrong
entry, press the CLEAR button
and dial the correct number.
'0 To assign External Feature
l
The following message
-'I( Access, dial "5." -
appears on the display:
i
JKL
•l
5
MOl/P : EXT FEAT
l
To assign Call Park-System
l
The following message
feature, dial "6."
appears on the display:
MN0
•l
6
MOl/P : PARK SYS
l
To assign Call Park-Station
l
The following message
feature,
dial "7."
appears on the display:
MOl/P : PARK ST
12-C-8
Continued