Panasonic KX-T336 System Reference Manual page 145

Description of Assigning items
13th through 16th Hundred Block
Extension
Operator Call (General)
Operator Call (Specific)
AFWLocal CO Line Access
Trunk Group 01-08 Access
Trunk Group 09-l 6 Access
Trunk Group 17-24 Access
Speed Dialing-System
Speed Dialing-Station
Conditions
Refer to "Numbering Plan (l/9)."
Assigns the leading one or two digits for extension DN (Directory
Number). If the leading digit is not programmed the DN assign-
ment is not possible.
Assigns the feature number for general operator calling. Calls will
always arrive at an Attendant Console if it is connected to the
system.
Assigns the feature number for specific operator calling. The
required operator is specified by dialing the feature number and "1"
for operator 1 and =2" for operator 2.
Assigns the feature number for Automatic Route Selection or local
access.
Assigns the feature number for Individual Trunk Group Dial Access
(01 to 08).
Assigns the feature number for Individual Trunk Group Dial Access
(09 to 16).
Assigns the feature number for the specified EQA or OCC Trunk
Group Access.
Assigns the feature number for Speed Dialing-System.
Assigns the feature number for Speed Dialing-Station.
. .
!
13th to 16th Hundred
Extension numbers cannnot include *" and u#."
Block Extension
Speed Dialing-Station This feature number cannot include "#."
9-D-38