Panasonic KX-T336 System Reference Manual page 277

M. Error Message Tables
1 .OO Error Messages Related to
the Assigning Items in the
Same Screen
If there is a wrong entry in the displayed screen,
The (XXX) indicates
one of the error message
the following appears on the message line when
numbers shown below and possible causes of the
storing the entry: "Contradict the relative item errors and countermeasures for
them are as
internal (XXX)."
follows.
Error Message No.
ww
Probable Cause Countermeasure
010
(page length)-(skip length) < 6
Make (page length)-(skip length) z 6.
011
012
t-
020
I
040
(receive digit) 2 (delete digit) is not established Make (receive digit) z(delete digit).
in - Special Attended DID screen.
Restriction Level-Operator _I. Restriction Level
Make Restriction Level-Operators Restriction
-International is not established in - Operation Level-International
(l/3) soreen
Day-night combination in the incoming mode is Check the day-night combination in incoming
not correct. mode.
Combination of the terminals of operators 1,2
Check the combination of terminals for
is incorrect. operators 1,2.
I
050
I
DN is not installed. I Designate the installed DN.
I
I I
I
051
I
Attempting to assign FDN's of UCD # 1 to # 4
I
Set FDN of other UCD, or extension directory
for the overflow destination of UCD # 5 to # 32 number.
070
Attempting to assign ita own extension number
on the key which cannot be assigned to its own
extension number.
<example> DSS(ICM)
'g DSS(DN)
.T.e-y .
SDN
Specify the number except its own extension
number.
----
Specifying UCD number inoorreotly.
I
Assign UCD to only one ICM.
100
Date value is incorrect on the check of month,
Check the date setting.
and leap year in the time and date setting
screen.
9-M-l