Panasonic KX-T336 System Reference Manual page 207

Telephone Type
OHCA Circuit
Intercom Number
Next Hunt
Station
Parallel Connect
Message Waiting Indication
Assignable telephone types differ depending on the card types connected
to the extensions, as follows:
Card Type
Telephone Type Assignable
PLC . PlTS
SLC SLT
HLC PITS or SLT
OPX
OPX
If "SLT" or 'OPX" is selected, O-" will appear in the following items in
'Extension-Station (l/3)" screen and setting is impossible:
l
Model
l
OHCA Circuit
l
Intercom Number
l
Parallel Connect
This setting applies not to executing side but to receiving side.
Intercom numbers can be one or two digits.
Within an intercom group, if one digit intercom number is assigned, it is
prohibited to use the digit as the leading digit of another two-digit intercom
number.
For instance, if the digit "2" is assigned as an intercom number, the digits
"20' cannot be assigned as another intercom number in the same intercom
group.
It is impossible to store the extension number of the setting extension, as well
as the extension numbers assigned by other extensions as to be their Next
Hunt Station.
. .
Parallel Connection with SLT is available only when PITS telephone
interfaced with HLC card is selected.
If PITS telephone interfaced with PLC card is selected, " - "will appear in
Parallel Connect field and parallel connect assignment is not avialble.
The setting of?Lamp" is valid only when the extension is an SLT with
MESSAGE lamp which is interfaced with the KX-T96175 (SLC card with
Message Waiting).
If an extension card other than the KX-T96175 is installed, "-* appears
and this item cannot be assigned.
Note:
Be sure to select None' for this setting if an SLT without MESSAGE lamp
is interfaced with the KX-T96175.
When pressing the NEXT key, this screen changes as follows:
Station Station Station
'\
4 Equipment 4 Equipment + Equipment +
------
!
No. 1 (l/3)
No. 1 (2/3) No. 1 (313)
'
Pressing the PREV key changes the screen in reverse order.
9-G-4
(30393)